ODM 20ft 40ft Standard Size Accommodation Modular House Container Products, Quotes
View Quotation Details
Engineered with Corten-A structural integrity, sub-zero casting resilience, and ISO-compliant stacking foot nodes for global sea, rail, and stationary deployment.
From standardized maritime corner blocks to smart load-monitoring leveling systems: how critical junction hardware ensures structural equilibrium under dynamic stress.
The standard ISO corner casting foot forms the mechanical nucleus of global shipping logistics. Bottom corner castings (designated Bottom-Left BL and Bottom-Right BR) must maintain exacting millimeter tolerances to engage twist-locks on cellular container vessels, skeletal semi-trailers, and intermodal railway wagons under multi-axis dynamic loads.
Global logistics companies, defense suppliers, and modular architects face increasing pressure regarding raw alloy traceability and structural testing certification. Sourcing reliable OEM container feet demands comprehensive heat-lot tracking, ultrasonic flaw detection, and low-temperature Charpy V-notch impact validation to avert catastrophic fracture during heavy vertical stacking.
Traditional carbon steel formulations are prone to brittle fracture below zero degrees Celsius. Modern OEM casting steels, such as SCW480 and specialized ASTM A216 WCB variants, are micro-alloyed and normalized to guarantee impact energy absorption exceeding 27 Joules at -40°C, fulfilling stringent DNV-GL offshore and polar route certifications.
Tailored structural foot castings, foundation connection nodes, and leveling accessories solving critical operational bottlenecks.
In container-based residential and commercial structures, foundation feet replace conventional poured-concrete footings. Heavy-duty adjustable leveling feet lock directly into bottom ISO corner castings, accommodating rough terrain, ensuring seismic tie-downs, and enabling rapid modular assembly.
Refrigerated cargo carries immense centralized machinery weight. OEM reefer corner feet incorporate optimized thermal break isolation pads and reinforced lateral webs that prevent galvanic thermal bridging while resisting compressive loads exceeding 84,000 kg during full 9-tier vessel stacking.
Operating under DNV 2.7-1 and EN 12079 guidelines, our offshore container feet and padeye assemblies undergo 100% Non-Destructive Testing (NDT) via Magnetic Particle and Ultrasonic Inspection. They withstand high dynamic shock amplification factors typical of open-sea crane transfers in North Sea environments.
Transportation of concentrated ores and dense industrial bulk materials subjects container base rails and corner castings to extreme racking moments. Gusset-reinforced bottom feet distribute vertical point stresses smoothly into the bottom side rails, eliminating fatigue tears near bottom twist-lock apertures.
Comprehensive cost modeling based on metallurgical alloy, testing regime, dimensional configuration, and wholesale volume tiers (FOB Tianjin/Suzhou Port Basis).
| Part Model / Foot Type | Material / Steel Grade | Yield / Tensile Strength | Charpy V-Notch (-40°C) | MOQ | Indicative Price Range (USD/Set) | Compliance Standards |
|---|---|---|---|---|---|---|
| CIM-ISO-STD1161 Standard Corner Casting (8-Piece Set) |
Cast Steel SCW480 / ASTM A216 WCB | ≥ 280 MPa / ≥ 490 MPa | ≥ 27 Joules | 50 Sets | $145.00 – $185.00 | ISO 1161 / BV / ABS |
| CIM-OFF-DNV271 Offshore High-Impact Base Feet (4-Piece) |
Normalized Low Alloy Corten E36-3 | ≥ 355 MPa / 490-630 MPa | ≥ 42 Joules | 20 Sets | $290.00 – $380.00 | DNV 2.7-1 / EN 12079 |
| CIM-MOD-LVL50T Modular Jacking & Leveling Foot Post |
High-Strength Q355B + Galvanized Screw | ≥ 355 MPa / 470-630 MPa | N/A (Stationary Build) | 10 Sets | $210.00 – $275.00 | CE / EN 1090 / ISO 9001 |
| CIM-REEF-THERM Cold Storage Thermal-Isolating Foot Base |
WCB Steel + High-Density Composite | ≥ 310 MPa / ≥ 520 MPa | ≥ 34 Joules | 25 Sets | $240.00 – $315.00 | CSC / BV Certified |
| CIM-MIN-HVY100 Heavy Mining Skids & Foot Plates |
Wear-Resistant Hardox/NM450 Integrated | ≥ 450 MPa / ≥ 680 MPa | ≥ 30 Joules | 15 Sets | $340.00 – $460.00 | Custom Mining Spec |
*Note: Unit prices reflect OEM volume procurement scales. Raw material indexes (Corten steel/scrap iron surcharge) and customized surface passivation (hot-dip zinc vs. electroplating) influence actual contract costs.
Headquartered in Tianjin with comprehensive production lines situated ~100 km from major seaports, ensuring rapid staging and direct container loading for seamless global distribution.
Established in 1983, CIMIC Group brings four decades of metallurgical mastery to every weld, cast, and custom container fabrication. Documented standard operating procedures guarantee traceability back to mill ladle heats.
Units undergo verification according to BV (Bureau Veritas), ISO 9001, and ABS safety approval plates. Offshore units conform to strict DNV certification requirements, supported by EN 10204 3.2 material testing documentation.
Positioned in the Tianjin FTA Pilot Area and Suzhou industrial corridors, our strategic proximity eliminates prolonged domestic haulage, reducing port transit risk and expediting freight forwarding across African, European, and American trade lanes.
Anticipating future intermodal demands through intelligent sensors, composite metallurgy, and automated quick-coupling mechanisms.
Integrating micro-piezoelectric sensors inside the hollow inner vault of the ISO corner foot casting. These sensors continuously report real-time vertical stack tonnage, lateral shift vectors, and center-of-gravity displacements directly to vessel bridge monitoring systems.
Transitioning from basic zinc-rich primer finishes to atomized graphene-epoxy thermal barrier coatings. This leap increases salt-spray corrosion endurance from 1,200 hours to 4,500+ hours in aggressive marine atmospheres without degrading casting weldability.
Developing hydraulic self-aligning twist-lock foot receptors designed for automated guided vehicles (AGVs) and robotic quayside container cranes, eliminating manual stevedore intervention during high-throughput maritime port transshipment.
In-depth responses curated by our senior structural engineering team addressing international compliance, metallurgy, and wholesale ordering.
Discover our complete portfolio of heavy-duty dry boxes, customizable multi-door storage units, and pre-engineered modular structures ready for export.
